LVDEPLOY
Advanced

Low Voltage Project Manager

LVDeploy v1.3 — Authorised Personnel Only
⚠ Disclaimer & Acceptable Use This tool is the exclusive property of LVDeploy and is intended solely for authorised personnel. All data entered is for internal cabling documentation purposes only. Unauthorised access, distribution, or reproduction of this tool or its contents is strictly prohibited. By logging in you agree to use this tool responsibly and in accordance with LVDeploy policies. LVDeploy accepts no liability for inaccurate documentation entered by users.
Username
Password
Incorrect username or password. Please try again.
© 2026 LVDeploy v1.3 — All rights reserved.
LVDEPLOY
Advanced

Low Voltage Project Manager

Upload a floor plan, place data port locations, draw cable runs to MDF/IDF, Instantly generate a Bill of Materials, install time estimates and a project task list.

Termination rooms
MDFMDF room
IDFIDF closet
PData Ports
▼
11-port outlet
22-port outlet
33-port outlet
44-port outlet
55-port outlet
66-port outlet
IPWireless & IP Devices
▼
WAPWireless Access Point
VoIPVoIP Phone
IoTIoT / Smart Device
TVTV / Monitor (Network)
⚡ PoE Note: WAP/CAM/VoIP require PoE switch ports. Cat6A recommended for PoE++ loads.
Network Hardware & Endpoints
SWEdge Network Switch (IDF)
INJPoE Injector / Midspan
EXTPoE Extender (>100m)
PTPWireless Bridge (P2P)
PRNPrinter / MFP / Copier
SGNDigital Signage Player
CLKPoE / Synchronized Clock
TCLKEmployee Time Clock
ENVEnvironmental Sensor
ICMVideo Intercom / Door Station
POSPOS Terminal / Kiosk
CRConference Room
▼
CTVLarge Screen TV
VCVideo Streaming Setup
WBLarge Interactive Whiteboard
SCHScheduling iPad (wall or table)
Conference table (resizable)
Table — Horizontal
Table — Vertical
🪑 Tip: Drag a table onto the plan, then drag its corner handle to resize. Right-click it to add up to 4 data cable drops right at the table.
AV Build-Out
MICCeiling Microphone Array
TBXTable Connectivity Box
HDBTHDBaseT Extender Pair
WPSWireless Presentation
TPRoom Control Touch Panel
PRJProjector + Screen
VWVideo Wall / LED Display
ALSAssistive Listening (ADA)
SCSecurity Cameras
▼
Cameras
DOMEDome Camera
BULLBullet Camera
TURRTurret / Eyeball
PTZPTZ Camera
360360° / Fisheye
MULTMulti-sensor
THRMThermal Camera
LPRLPR / ANPR Camera
Head End
NVRNVR / Video Recorder
SWPoE Switch (camera)
Right-click a camera to set lens angle, field of view and range, then toggle coverage to check the shot. Already laid the site out in the Security Camera manager? Bring it in with Import → Cameras.
ACAccess Control
▼
DOORDoor Location
ACPAC Controller / Panel
AC cabling type
🔒 Tip: Drag door & panel onto the floor plan, then right-click a door to connect it to its controller panel.
IDIntrusion Detection
▼
PIRMotion Detector
DRDoor Sensor
WINWindow Sensor
GBGlass Break Sensor
SIRSiren / Strobe
ALMAlarm Panel
🚨 Intrusion Note: Sensors home-run on 22/4 alarm wire back to the alarm panel. Panel needs 110V outlet + phone/cellular/network backup.
LSLife Safety
▼
Estimating & rough-in only. Fire alarm is a licensed, permitted trade in most jurisdictions. Final device count and spacing must come from engineered NFPA 72 drawings approved by the AHJ.
Panels
FACPFire Alarm Control Panel
ANNRemote Annunciator
Initiating Devices
PULLManual Pull Station
SMKSmoke Detector
HEATHeat Detector
DUCTDuct Smoke Detector
Notification
H/SHorn / Strobe
SP/SSpeaker / Strobe (voice evac)
Sprinkler Monitoring & Control
FLOWSprinkler Flow Switch
TMPSprinkler Tamper Switch
HOLDMagnetic Door Holder
RLYElevator Recall / Control Relay
Runs are costed as red-jacket FPLR: 18/2 for initiating circuits, 16/2 for notification appliances. These devices home-run to the FACP, so they are excluded from network auto-wire.
AUAudio Cabling
▼
SPKCeiling Speaker (70V/8Ω)
WSKWall Speaker / Horn
SUBSubwoofer / Floor Speaker
SMSound Masking Speaker
VOLVolume Control / Attenuator
AMPAmplifier / Zone Controller
WPLAudio Wall Plate (RCA/XLR)
🔊 Audio Note: Speakers use 16/2 (or 14/2 for subs). 70V systems require transformer tap setting at each speaker.
FFiber Runs
▼
OM3OM3 — 6 strand
OM3OM3 — 12 strand
OM3OM3 — 18 strand
OM4OM4 — 6 strand
OM4OM4 — 12 strand
OM4OM4 — 18 strand
SMSingle Mode — 6 strand
SMSingle Mode — 12 strand
SMSingle Mode — 18 strand
📝Canvas Notes
▼
📝Note / Annotation
Drag onto canvas, then double-click to edit. Use Draw Cables to draw a pointer arrow to any node.
Data cable type
Cable jacket type
Data cable testing
Fiber testing
Floor plan scale
px = ft
Auto-wire new devices — MDF/IDF
Applies when placing data ports, WAPs, cameras, and other devices.
Cable path & wall height
Ceiling ht ft
Port ht (off floor) ft
MDF patch ht ft (rack)
Cable slack
Service loop ft per run
Added to every cable run for termination slack at both ends.
Rack / enclosure
Type
Mount
Rack size
PoE switch & UPS come from the Rack manager.
Build the rack in the Server Rack manager and bring it in with Import → Server Rack, or edit the equipment list on the Server Room page.
Currently using: 24-port PoE · 2U UPS
Auto-save
Not saved yet
Auto-save above only protects THIS browser's storage — clearing your cache or switching computers loses it. For a real backup file on disk, turn this on:
Room dimensions
Lengthft
Widthft
Ceiling htft
MDF wall
MDF offsetft
Slack
Port locations
Enter dimensions and click Calculate
Info
Canvas
Orient
Icon Size
Draw
View
ft
Save & Print
Projects
Generate
Import
Accounting
Display
Session
🏢 Floor:
Upload a floor plan or drag ports onto the canvas
Best floor plan size: 1200 × 700px PNG  |  Also supports JPG, GIF, PDF, XLS, XLSX
Use the ◀ tab on the sidebar's edge to hide it for maximum width
Bill of materials↗
Cable schedule↗
Install time↗
🗄 Rack Calc↗
👷 Assignments↗
📑 Change Orders↗
🧾 Punch List↗
☑ Install List↗
📝 Project Notes↗
📋 Site Survey↗
📷 Photos↗
✨ AI Proposal↗
Place ports on the canvas and click Generate BOM
Ready — drag ports from the left panel onto the canvas
📍 Connect cable to…
🟣 Start fiber run from here
📦 Change box type…
🔌 Change data count…
🔌 Connection type
📏 EMT pipe height
📝 Add notes…
📷 Photos…
📋 Duplicate node
🗑 Delete node